Current position:  Home > Default > Change a c-series module

Change a c-series module

Time:November 30
Advertisement
I have created a labview project and am using a RT Controller cRIO-9024 with cRIO-9118 Chassis.  I assigned the NI9474 to 5 of the slots and the NI9425 to the remaining 3 slots.  I now need to change the NI9474 to a NI9478.  When I try to add a new C-Series module nothing happens?  I have even tried removing the NI9474 from the project and I still can't add a new C-Series module.  Can someone tell me what I am doing wrong?  Thanks
Solved!
Go to Solution.
Advertisement
Do you only have 1 of each module in your chassis? If so, why have you added the modules to multiple slots? I don't think it will let you add a module if all 8 slots have had modules allocated to them - you will probably need to remove the NI9474 and then add the NI9478. If you rename the module/signals, it shouldn't affect your FPGA code.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

Why do I keep getting error -65581 when trying to use a cRIO 9024 and c series modules

2015-10-11

I am simply trying to send out a digital high on DIO0 of a 9401 c series module and I get the following error every time.   Error -65581 occurred at Shared Variable in Send True Value Out.vi Possible reason(s): CompactRIO:  (Hex 0xFFFEFFD3) The FPGA

Which c-series modules are compatible with Scan Mode?

-0001-11-30

OK, so I just wasted 4 hours. I started a new Project with a need to use a 9220 analogue input card on a cRIO 9030, but immediately became stuck when I was unable to add the module using the right click Add New C-Series Module wizard to the 9030 chas

Can I create a task that includes 2 C series modules?

-0001-11-30

I am trying to create a single task that includes 2 NI-9425 C series modules but when I wire the physical channel constant "Mod3/port0, Mod4/port0" into the DAQmx Create Virtual Channel.vi I receive error -200086 which states physical channel ra

CompactRIO, CVI, and C series modules

-0001-11-30

Being used to LabVIEW, not sure how to interface to the C-series modules on my cRIO using CVI.  The project I'm on needs to use CVI, and I have no idea how to interface to my cards -- e.g. writing to my DIO card or reading from an AI channel, etc.  

C-Series Module NI 9871, 4-Port, RS485/422 Serial Interface

-0001-11-30

I have a question regarding the C-Series Module NI 9871, 4-Port, RS485/422 Serial Interface. I need to find out how it recovers the data from the link. I need to compare it with 8b/10b encoding. Does anyone know what UARTs are used or how the data is

A much more efficient way to add C Series modules manually

-0001-11-30

Scenario Suppose that we want to start coding my Real-Time application, but the hardware hasn't arrived yet. We can't Discover the chassis + modules, so we need to add modules manually. Current editor To add N modules, we need to launch this dialog N

10Gig Copper SFP for Nexus F Series module (N7K-F248XP-25E)

-0001-11-30

Does Cisco have 10Gig Copper SFP which can be supported on Nexus platform in the F Series module (N7K-F248XP-25E)Leo, Thank you for the answer, you mentioned 10Gig Copper module in your reply (Part# N7K-F248XT-25E) but I already have Fiber Module (Pa

Detecting C Series Module Fault through I/O Variable Node

2015-10-11

Hello LabVIEW Users. My name is Eisuke Ono, An Application Engineer at NI Japan. One of our customer is requesting a function. The function is to retrieve information of module fault from C Series I/O variable Node (Scan Interface). I know that we ca

Can lookout control C series modules?

2015-10-11

Greetings, I was wondering if Lookout had the ability to recognise dataAq modules( i.e. NI9205, Ni9265). I have a solenoid that opens or closes a valve using a 4-20 current loop. i sense position with a 4-20 analog input module from Biel-Wiedmann. Bo

C series module compatibility with 9103 Chassis

-0001-11-30

Hi All, I have a 9004 cRIO controller and a 9103 cRIO Chassis. I want to use a 9239 or 9229 and a 9225 module for developing my application. Can anyone tell whether these modules are compatible with my existing Controller and Chassis. Regards, Cooldu

FPGA error: Failed to create C series module

-0001-11-30

I am using sbRIO 9631 with LabVIEW 2012, along with FPGA module 2012. Everything was working fine till yesterday I got this error while creating a new FPGA project.  " LabVIEW FPGA:  An error occurred downloading the VI to the FPGA device.  Verify th

CRIO 9025- FPGA - Not able to access c-series modules integrated with chassis

-0001-11-30

Hi, I am using NI cRIO 9025 module. I have conncected the chassis with few cSERIES channels for voltage and current sensing. When I tried to configure, I am getting the following error Access denied: This target is running a version of LabVIEW Real-T

MAX will not display any installed modules mounted to cRIO-9074 chassis WinXP SP3 LV2010 developer

2015-10-11

MAX will not display any installed modules mounted to cRIO-9074 chassis WinXP SP3 LV2010 Developer Suite. I can see the backplane in MAX and Project explorer but none of the modules show up for configuration in the drop down lists.  The LV was just i

How to communicate with a 9401 module using 9151 expansion and 7813r PXI card

2015-10-11

Hi, I have just started working with my 7813 R-series card.  I was able to create a simple VI in which I could send and receive digital signals.  Now I would like to do something similar using my 9151 expansion chassis and 9401 C-series module.  If p

FPGA project - custom cRIO module driver development

-0001-11-30

Hi! I'm developing the driver for my custom cRIO module. The module has 4 analog input channels. After analog-to-digital conversion I need to transmit the digital data via the cRIO bus. I placed an FPGA I/O node on my block diagram (see the attached

Which type of ADC is used in M Series, S Series and C Series DAQ Cards?

-0001-11-30

Hi I want to know which type of Analog to digital converters(ADC) are used in M Series and S Series DAQ Cards. I know that DSA Cards and some C series are using Delta Sigma ADC. What about the ADC used in non delta sigma C Series modules. Why Delta s

How do I detect a NI9862 module under FPGA

-0001-11-30

Hello, I am trying to add NI9862 module under the FPGA target of NI9144 chassis. But I am unable to do so. Please see the attached image. I read some of the earlier posts on the forum and I understand that some of these CAN modules need to be added i

Nexus 7K F2 modules Multicast support

-0001-11-30

I have some questions related to F2 multicast support: Cisco multicast configuration guide says that "F2 modules do not support any form of IPv4 or IPv6 tunnels" what dose it means? Are they referring to MDF and GRE tunnels? I know PIM-BiDir is

My NI-9263 cRIO module is getting detected as NI-9215 Module. Why?

-0001-11-30

I have a NI 9263 and NI9201 cRIO Modules, I'm detecting the cRIO, the chassis and the c Series Modules in a Project, In the Project 9201 is detected properly but 9263 is detected as 9215. Why?Yawei7 wrote: I thought the size of the integers are relat