Current position:  Home > Default > Server0 never comes up J2EE down- Urgent!!!!!

Server0 never comes up J2EE down- Urgent!!!!!

Time:November 30
Advertisement
Hi,
Ihave installed a SM 4.0 system with ABAP+Java.
After all done with SP10, I had changed the master client from 001 to 100 which I created. From then my Server0 is not starting at all.
I tried all the below:
1. Created a new client 120, did a client copy with SAP_ALL of 000 client and users of 001 client.
2. CHanged the productive cleint in configtool to 120 and gave SAPJSF as the ume.r3.connection.master.user
3. I changed my data source to datasource_abap.xml from the portal data source. (I was not able to follow note 718383, as my server0 was already down.
Now I still get UME error and the server0 does not start at all.
In between, I enabled the superadmin user SAP* and the server0 came up, but all my SLD, Useradmin pages were balnk and had no data at all.
Now I get errors which are below: Please help, as I did all that I could. May be still I miss something.
My hostname is also correct, but the log says MSGHOST, MSSERv is wrong.
Not sure where is the mistake.
security.0.log
#1.5#000C29F94F1B001E00000006000010FC00042D46241F5B62#1175679183796#/System/Security/Usermanagement##com.sap.security.core.persistence#######SAPEngine_System_Thread[impl:5]_53##0#0#Fatal#1#com.sap.security.core.persistence#Java#Initialization of UME persistence adapter "" failed.##Initialization of UME persistence adapter "" failed.#1#R3_DATASOURCE#
#1.5#000C29F94F1B001E00000009000010FC00042D46241F6332#1175679183796#/System/Security/Usermanagement##com.sap.security.core.server.ume.service.UMEServiceFrame#######SAPEngine_System_Thread[impl:5]_53##0#0#Error#1#com.sap.security.core.server.ume.service.UMEServiceFrame#Plain###UME initialization failed.#
#1.5#000C29F94F1B001E000000000000127000042D4630837790#1175679391718#/System/Security/Usermanagement##com.sap.security.core.persistence#######SAPEngine_System_Thread[impl:5]_70##0#0#Fatal#1#com.sap.security.core.persistence#Java#User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connection data are correct and the backend system is available. Error message: "". Connection data (obtained from properties of UME service in section "ume.r3.connection.master.": "".##User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connection data are correct and the backend system is available. Error message: "". Connection data (obtained from properties of UME service in section "ume.r3.connection.master.": "".#2#Connect to message server host failed
Connect_PM  TYPE=B MSHOST=rockcrystal GROUP=PUBLIC R3NAME=SM4 MSSERV=rockcrystal PCS=1
ERROR       service 'rockcrystal' unknown
TIME        Wed Apr 04 18:36:31 2007
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -3
MODULE      ninti.c
LINE        530
DETAIL      NiPGetServByName2: service 'rockcrystal' not found
SYSTEM CALL getservbyname_r
COUNTER     1
  passwd=********
  receiverid=master
  sysnr=01
  client=120
  poolmaxsize=10
  mshost=rockcrystal
  user=SAPJSF
  gwserv=sapgw01
  r3name=SM4
  msserv=rockcrystal
  receiverid_guest=master
  ashost=rockcrystal
#1.5#000C29F94F1B001E000000020000127000042D4630838782#1175679391718#/System/Security/Usermanagement##com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init()#######SAPEngine_System_Thread[impl:5]_70##0#0#Error#1#com.sap.security.core.persistence.datasource.imp.R3PersistenceBase#Java#An exception was thrown in the UME/ABAP user management connector. Message: .##An exception was thrown in the UME/ABAP user management connector. Message: .#1#Connect to message server host failed
Connect_PM  TYPE=B MSHOST=rockcrystal GROUP=PUBLIC R3NAME=SM4 MSSERV=rockcrystal PCS=1
ERROR       service 'rockcrystal' unknown
TIME        Wed Apr 04 18:36:31 2007
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -3
MODULE      ninti.c
LINE        530
DETAIL      NiPGetServByName2: service 'rockcrystal' not found
SYSTEM CALL getservbyname_r
COUNTER     1
#1.5#000C29F94F1B001E000000040000127000042D4630839041#1175679391718#/System/Security/Usermanagement##com.sap.security.core.persistence#######SAPEngine_System_Thread[impl:5]_70##0#0#Error#1#com.sap.security.core.persistence#Java#User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to initialize the ABAP data source: ##User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to initialize the ABAP data source: #1#Connect to message server host failed
Connect_PM  TYPE=B MSHOST=rockcrystal GROUP=PUBLIC R3NAME=SM4 MSSERV=rockcrystal PCS=1
ERROR       service 'rockcrystal' unknown
TIME        Wed Apr 04 18:36:31 2007
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -3
MODULE      ninti.c
LINE        530
DETAIL      NiPGetServByName2: service 'rockcrystal' not found
SYSTEM CALL getservbyname_r
COUNTER     1
#1.5#000C29F94F1B001E000000060000127000042D4630839B1C#1175679391734#/System/Security/Usermanagement##com.sap.security.core.persistence#######SAPEngine_System_Thread[impl:5]_70##0#0#Fatal#1#com.sap.security.core.persistence#Java#Initialization of UME persistence adapter "" failed.##Initialization of UME persistence adapter "" failed.#1#R3_DATASOURCE#
#1.5#000C29F94F1B001E000000090000127000042D463083A2E8#1175679391734#/System/Security/Usermanagement##com.sap.security.core.server.ume.service.UMEServiceFrame#######SAPEngine_System_Thread[impl:5]_70##0#0#Error#1#com.sap.security.core.server.ume.service.UMEServiceFrame#Plain###UME initialization failed.#
I followed the Note to change productive client also. Still same issue.
Regards,
KP
Advertisement
Hi Markus,
I had changed the settings in config tool and configured the datasource.abap.xml properly with all the required ume.r3.connection paramteres.
Nowe everything is fine except only one error. I get an error on the anonymous user.
The security.0.log file gives the below error.
"Anonymous principal not configured"
#1.5#000C29F94F1B001E000000030000125400042D421AD2D242#1175661847906#/System/Security/UserStoreUME##com.sap.security.core.server.userstore.UserContextUME#######SAPEngine_System_Thread[impl:5]_16##0#0#Error#1#/System/Security/UserStoreUME#Java###Error while trying to get the anonymous user: #1#Cannot find first configured anonymous user: J2EE_GUEST: USER_AUTH_FAILED: User account for logonid "J2EE_GUEST" not found!#
#1.5#000C29F94F1B001E000000050000125400042D421AD2F1E8#1175661847906#/System/Security##com.sap.engine.services.userstore.UserContext.(UserContextSpi, Properties)#######SAPEngine_System_Thread[impl:5]_16##0#0#Fatal#1#com.sap.engine.services.userstore#Plain###Can not instantiate UserContext with given properties.#
So I enabled the superadmin user and password in config tool to SAP* and now the server0 starts. But the issue is, now if I go to the useradminscreen, it is blank. I am not sure what is to be done.
How do I proceed further in this? Do I have to make any changes in Visual administrator, so that I can correct the UME in-consistencies.??? Why is my browser blank???
Please do help...
This is my useradmin URL that is showing in the browser address bar:
http://172.27.1.2:50100/webdynpro/dispatcher/sap.com/tcsecumewdumeadmin/UmeAdminApp
Only my J2EE index.html page has a proper URL. All other pages like, SLD, UME, etc has tcsecumewd kind of URL. Not sure if this would be an issue.
I tried to follow the below SAP help, but I do not find those parameter anonymous user ID in the UME properties.
2.1. Activate SAP* (“emergency user”)
Change the UME properties:
○     ume.superadmin.activated=true
○     ume.superadmin.password=
Restart the server.
Log on to the UME Web application (/useradmin), where you can search for users and groups. You can also create missing users and groups or fix the mapping between them.
If you even see an error like Anonymous principal not found or Anonymous principal not configured, the guest user may have been deleted. In addition to the properties mentioned above, you have to change the guest/anonymous user settings:
○     UMEproperty:
ume.login.guest_user.uniqueids=SAP*
○     J2EE Engine Security:
In the Config Tool, switch to configuration editor mode and choose Security  ®  Userstores  ®  UME User Store. Set anonymous-user=SAP.*
○     J2EE Engine Security:
In the Config Tool, switch to configuration editor mode and choose Security  ®  Userstores  ®  UME User Store  ® Configuration. Set anonymous-user=SAP.*
When you have finished, change these settings back again and restart the server.
Regards,
PK

SAP netweaver developer studio - deploying to j2ee engine - URGENT!!

-0001-11-30

I am trying a deploy a j2ee application from SAP netweaver developer studio. It is asking for SAP J2EE engine's message server port. Do you know from where I can find that???Hi, the message server port is given in the profile file for the Central Ser

J2ee deployment-urgent

-0001-11-30

could anyone please tell me how to deploy j2ee onto my jdk profile for a server applicationIf your trying to run servlets or jsp pages, u will need to install a webserver. There are alot of free webservers out there. U can use Lite WebServer or tomca

J2ee file (URGENT)

-0001-11-30

I am running j2ee bat file in win98. I have made all the necessary changes in setenv and j2ee as suggested by forum. But when by j2ee bat file reaches this line in DOS prompt %JAVACMD% -D%SSL_A%=%SSL_B% -D%JAAS_A%=%JAAS_B% -D%LISTEN_A%=%LISTEN_B% -Do

Sapmmc has yellow light on disp+work w/J2EE status info unavailable

-0001-11-30

Hi All, We have a dual stack running ECC 6.0 on Netweaver 7.0. MSSQL 2005. The Java stack has never started successfully. The sapmmc shows a yellow light on disp+work w/J2EE status info unavailable. There are no Server0 logs because the stack has nev

Issue with CE 7.2 Trial version Installation

2015-10-11

Hi Friends, I was installing the trial version of CE 7.2 where the installation went smoothly until it reached the step "Install Java engine". I am running the installation using a desktop user with admin rights. Here is a brief information abou

File system is getting full Frequently in Federated Portal

-0001-11-30

Hi In my production federated portal the file system File system           /usr/sap/<SID>/JC01 - is getting full 100% for every 30 minutes , what could be the reason for this behavior,  this is happening since from 6 days can I  be assisted on this

Web Dynpro error log location

-0001-11-30

I'm pretty new to Web Dynpro and have a few questions regarding the location of the different error log. 1. Sometimes the web dynpro IDE prompt up saying "please check the error logs for details". Where is the error log located? 2. After i deplo

J2EE StartUp Problem, URGENT.

-0001-11-30

Hi all! I'm having a problem since friday with the J2EE Engine Startup. The problem is that MMC says me that the server is running but i can access to the server by anyway. The developer trace of the jcontrol process is: [Thr 2968] Tue Aug 09 13:59:5

J2EE Server0 NOT STARTING Exitcode -11113

2015-10-11

Dear All, I have made changes in UME Configuration (ie) i changed default connections and after that my server is not starting. Herewith i have specified the log of both dev_server0 and std_server0.out. From the file std_server0.out i found that the

Urgent!!:::J2EE processes are not seen in SAPMMC

-0001-11-30

Hi experts, I installed WAS 04s on my pc. But for that i used administrator login(for window), after intallation i switched to my usual login(for window). Here i tried to run the SAPMMC but surprisingly i could not see the J2EE processes(server, SDM

Yellow status does not start  j2E server0

-0001-11-30

Hi Gurus, Everything was working fine until today.  SDM and dispatcher green light but server0 yellow status for about for  1 hour now and still does not start. Status starting framework... your help is greatly appreciated. defaultTrace.1.trc below:

J2ee server0 in starting apps mode

-0001-11-30

Dear All, My J2EE server was up and running and then I applied the license. Later it was not coming up for more than an hour. So I left and when i checked again next day it was up and running. But it was very slow. So I tried to do LDAP config. I was

One of the J2EE component (server0) could not be started in the MMC

-0001-11-30

Hello there, How do I redeploy the following SDAs using SDM remote GUI tool? (Based on SAP note 942050) com.sap.security.core.offline.sda (extract from SAPJEECOR*_.SCA) com.sap.security.api.offline.sda (extract from SAPJEECOR*_.SCA) com.sap.security.

Zip files in j2ee/cluster/server0/log/archive,  Can somebody explain these?

-0001-11-30

Our file system is filling up on our PI system, I see allot of .ZIP files in this directory,  can I just delete them? j2ee/cluster/server0/log/archiveHi David, as you can read [here|http://help.sap.com/saphelp_sem60ep1/helpdata/EN/f6/7d814282cfc153e1

Problem in starting the J2EE server0 process.

-0001-11-30

Hello Experts, We have EP 7.0 in our landscape, and when we try to start SAP J2EE engine.It shows the server0 process only for some time and later this process stops automatically. Even the WatchDog process stops. Is there is any configurations we ne

Authentication using database in j2ee ri server? URGENT!!

-0001-11-30

Hello I have installed j2sdkee1.3.1 and I use the web and ejb server that it includes. I start it with j2ee.bat and I create a application with jsp and ejb, and I use deploytool to deploy it. I don't have problem, but now I would like to use a form-b

Server0 is not up in j2ee eingine

-0001-11-30

Hi Experts, I am configuring Kerbores in EP server I have configured this in UME configuration. I have selected the LDAP after giving all the inputs i check ed test connection. The test connection is ok. And now when i  restarted the J2EE engine and

What server comes with J2EE download?(URGENT)

-0001-11-30

I've been trying to install jive Forum but always faced problem with it and it seems like J2EE original server don't support it. How can I used other servers like Tomcat with J2EE? Please help URGENT!Ok. I'm installing jive forums (www.jivesoftware.c

J2EE Process Table Server0 J2EE server status is not started

-0001-11-30

Dear Experts, When I open J2EE Enging Visual Administrator and choose default connection as usual, I am getting an error "Unable to lookup connection default http://<server>:8101/msgserver/text/logon returned empty list of connection parameters